The materials used to build an office, warehouse, or industrial roof can significantly impact a building’s fire performance, including how quickly the fire spreads and what protections are available to occupants and nearby structures. However, commercial roofing fire safety is typically overlooked until something goes wrong.
The UK Commercial roofing industry is influenced by the stratified nature of the Building Regulations and Approved Document B as well as British Standards like BS 476 and the more recent BS EN 13501 fire classification. These laws and regulations determine how roof covering materials respond to fire as well as the External fire spread and Surface spread of flame. With regard to roofing systems, the external fire safety performance is very critical since a covering that is easily ignitable or spreads flame quickly can transform what would have been a minor incident into a major disaster.
In recent years, the discussion surrounding the use of certain insulation and roofing membrane combinations, especially involving PIR (polyisocyanurate) insulation boards, has intensified. PIR provides great thermal performance, but its fire behaviour varies depending on how it is installed, what kind of facing is used, and whether it is sufficiently protected by fire-rated boards or membranes above and below. Getting this detail wrong can result in a roof build-up that, while using individually compliant products, fails as a system.
When it comes to commercial and industrial roofing, landlords and insurers typically use the BROOF(t4) classification under BS EN 13501-5 as a benchmark. This classification means that the roof system, which is tested as a complete unit rather than separate components, does not allow for the spread of an external fire, nor does it cause a significant increase to the fire. For compliance purposes and to make insurers happy afterwards, it is necessary to keep Broof(t4) documents that show the exact build-up construction that was installed.
Along with structural fire safety, insurance is becoming an increasing issue. Many commercial property insurers are now requiring insured parties to show proof of fire-rated roofing systems. This is especially true for large industrial units or large buildings that hold combustible stock. A roof that is poorly specified, ageing, or unknown in its fire performance will likely result in higher insurance premiums, exclusions, and in some cases a total loss of coverage. Many business owners do not realize that the replacement or refurbishment of a roof is just as much of a risk management decision as it is a maintenance decision.
Other than the materials used, detailing around roof penetrations, rooflights, ventilation units, and the intersections between different roof sections are also crucial for fire safety. Unprotected gaps or penetrations that are poorly sealed may provide pathways for fire and smoke to travel through compartments, bypassing the best specified roof covering. Any knowledgeable commercial roofing contractor should be able to show how these details are addressed and should be able to provide compliance documentation as part of the works.
When business owners plan to do a re-roof or major repairs, there are a few important things to keep in mind. First, insist that BROOF(t4) systems be used for the full build-up. Second, request test certificates from the manufacturer that are specific to your roof design. Finally, check with your insurer to see what their requirements are before the work gets started, not after a claim has been filed. Getting professional advice early saves you from costly surprises and ensures both compliance and coverage.